Difficulty
Moderate
Steps
13
Time Required
20 minutes
Sections
5
- Battery
- 3 steps
- RAM Plate
- 1 step
- Hard Drive Plate
- 2 steps
- Back Plate
- 4 steps
- DVD Drive
- 3 steps
Flags
0
BackToshiba Portege R705-P35
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off and unplug the laptop.
- Failure to turn off and unplug the cable could result in electric shock.
- Place the laptop upside-side-down with the hinges towards you.
Turn off and unplug the laptop.
Failure to turn off and unplug the cable could result in electric shock.
Place the laptop upside-side-down with the hinges towards you.
1024
Step 2
- Use your right hand to move the right switch from the locked position to the unlocked position.
- Use your left hand to move the left switch from the locked position to the unlocked position.
Use your right hand to move the right switch from the locked position to the unlocked position.
Use your left hand to move the left switch from the locked position to the unlocked position.
Step 3
- While keeping the left switch unlocked, pull the battery away from the computer with your right hand.
While keeping the left switch unlocked, pull the battery away from the computer with your right hand.
Step 4
RAM Plate
- Loosen the two captive screws in the plate with a Phillips #00 screwdriver.
- Remove the plate from the laptop.
Loosen the two captive screws in the plate with a Phillips #00 screwdriver.
Remove the plate from the laptop.
Step 5
Hard Drive Plate
- Loosen the two captive screws in the hard drive plate using a Phillips #00 screwdriver.
Loosen the two captive screws in the hard drive plate using a Phillips #00 screwdriver.
Step 6
- Use your hands to remove the hard drive plate from the laptop.
Use your hands to remove the hard drive plate from the laptop.
Step 7
Back Plate
- Remove the two 13 mm screws from the back plate using a Phillips #0 screwdriver.
Remove the two 13 mm screws from the back plate using a Phillips #0 screwdriver.
Step 8
- Lift and remove the small plate from the laptop.
Lift and remove the small plate from the laptop.
Step 9
- Remove the thirteen 6 mm screws from the back plate using a Phillips #00 screwdriver.
- Remove the five 5 mm screws from the back plate using a Phillips #00 screwdriver.
Remove the thirteen 6 mm screws from the back plate using a Phillips #00 screwdriver.
Remove the five 5 mm screws from the back plate using a Phillips #00 screwdriver.
Step 10
- Pull the back plate off, starting from the right side, being cautious of the ports on the left side.
Pull the back plate off, starting from the right side, being cautious of the ports on the left side.
Step 11
DVD Drive
- Use an opening tool to detach the hard drive connector from the DVD drive.
Use an opening tool to detach the hard drive connector from the DVD drive.
Step 12
- Remove the two 4 mm screws using a Phillips #00 screwdriver.
- Remove the one 3 mm screw using a Phillips #00 screwdriver.
- Remove the silver bracket that comes loose.
Remove the two 4 mm screws using a Phillips #00 screwdriver.
Remove the one 3 mm screw using a Phillips #00 screwdriver.
Remove the silver bracket that comes loose.
Step 13
- Pull on the orange bar with your fingers to detach it from the DVD drive.
- Pull out and remove the DVD drive from the laptop.
Pull on the orange bar with your fingers to detach it from the DVD drive.
Pull out and remove the DVD drive from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kathryn Hockenbury
Member since: 03/23/2022
833 Reputation
8 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 1-4, Botvin Spring 2022
Member of UMass Dartmouth, Team 1-4, Botvin Spring 2022
UMASSD-BOTVIN-S22S1G4
3 Members
16 Guides authored
