Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Motherboard
  • 8 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba Portege M400

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Motherboard
  • Using the plastic opening tool, remove the plastic hinge cover on the back of the laptop. Use caution not to damage this plastic cover.

Using the plastic opening tool, remove the plastic hinge cover on the back of the laptop. Use caution not to damage this plastic cover.

1024

Step 2

  • Using the plastic opening tool, remove the plastic cover directly above the keyboard. Make sure to start from the corners of the plastic cover.

Using the plastic opening tool, remove the plastic cover directly above the keyboard. Make sure to start from the corners of the plastic cover.

Step 3

  • Using the #1 Phillips head screwdriver, remove the two 3.8mm screws.

Using the #1 Phillips head screwdriver, remove the two 3.8mm screws.

Step 4

  • Remove the keyboard, make sure you gently remove any ribbon cables holding it to the rest of the computer. Bending or crimping a ribbon cable can break the device.

Remove the keyboard, make sure you gently remove any ribbon cables holding it to the rest of the computer. Bending or crimping a ribbon cable can break the device.

Step 5

  • Use a small phillips screwdriver to remove both metal shields as depicted.

Use a small phillips screwdriver to remove both metal shields as depicted.

Step 6

  • After removing the second metal covering you will remove the RAM compartment.
  • Simply pull apart the metal fasteners on the side; the RAM should pop out for removal.

After removing the second metal covering you will remove the RAM compartment.

Simply pull apart the metal fasteners on the side; the RAM should pop out for removal.

Step 7

  • Disconnect the wire from the exposed wireless card.
  • Pry open the top of the laptop and gently remove and disconnect the wires as shown.

Disconnect the wire from the exposed wireless card.

Pry open the top of the laptop and gently remove and disconnect the wires as shown.

Step 8

  • Remove the screws attaching the motherboard to the plastic housing.
  • Lift off the motherboard. Once it is free of screws and you’re done!

Remove the screws attaching the motherboard to the plastic housing.

Lift off the motherboard. Once it is free of screws and you’re done!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Dustin

Member since: 03/12/2014

1,090 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       University of Maryland, Team 6-2, Vijaybhaskar Spring 2014                        

                                                  Member of University of Maryland, Team 6-2, Vijaybhaskar Spring 2014 



                    UMD-VIJAYBHASKAR-S14S6G2                     


                                            4 Members                     


                                            14 Guides authored