Difficulty

Easy

Steps

6

Time Required

                          15 - 30 minutes

Sections

2

  • Battery
  • 3 steps
  • Wireless Card
  • 3 steps

Flags

0

  • BackToshiba Portégé M300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the computer over onto its back.

Turn the computer over onto its back.

1024

Step 2

  • Slide the lock on the left side to the unlock position.
  • Slide the lock on the right side to the unlock position until there is a clicking sound.

Slide the lock on the left side to the unlock position.

Slide the lock on the right side to the unlock position until there is a clicking sound.

Step 3

  • Remove the battery by sliding it away from the laptop.
  • Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

Remove the battery by sliding it away from the laptop.

Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

Step 4

              Wireless Card
  • Turn the computer onto the back.
  • Remove the Phillips #0 screw that secures the cover to the rest of the device.
  • One 5.1 mm coarse thread screw.
  • Pull the cover forward to release it.

Turn the computer onto the back.

Remove the Phillips #0 screw that secures the cover to the rest of the device.

One 5.1 mm coarse thread screw.

Pull the cover forward to release it.

Step 5

  • Use a Phillips #1 screwdriver to remove the two screws on opposite corners of the wireless card.
  • Two 4.0 mm coarse thread screws.
  • Use a plastic opening tool to gently lift the wireless card out while leaving the wire connected.

Use a Phillips #1 screwdriver to remove the two screws on opposite corners of the wireless card.

Two 4.0 mm coarse thread screws.

Use a plastic opening tool to gently lift the wireless card out while leaving the wire connected.

Step 6

  • Hold the edges of the wireless card and carefully disconnect the black 3 pin connector.

Hold the edges of the wireless card and carefully disconnect the black 3 pin connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Alison Wendt

Member since: 04/18/2013

135 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 21-51, Johann Spring 2013                        

                                                  Member of Cal Poly, Team 21-51, Johann Spring 2013 



                    CPSU-JOHANN-S13S21G51                     


                                            3 Members                     


                                            12 Guides authored