Difficulty

Easy

Steps

6

Time Required

Suggest a time??

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 3 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackToshiba Portégé M300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the computer over onto its back.

Turn the computer over onto its back.

1024

Step 2

  • Slide the lock on the left side to the unlock position.
  • Slide the lock on the right side to the unlock position until there is a clicking sound.

Slide the lock on the left side to the unlock position.

Slide the lock on the right side to the unlock position until there is a clicking sound.

Step 3

  • Remove the battery by sliding it away from the laptop.
  • Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

Remove the battery by sliding it away from the laptop.

Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

Step 4

              RAM
  • Turn the computer over onto the back.
  • Use a Phillips head screwdriver to remove the screw holding the RAM cover in place, and lift the cover.
  • One 4.0 mm coarse thread screw.

Turn the computer over onto the back.

Use a Phillips head screwdriver to remove the screw holding the RAM cover in place, and lift the cover.

One 4.0 mm coarse thread screw.

Step 5

  • Use a plastic opening tool to open the silver flaps on either side of the RAM.
  • Once both flaps are released, the RAM should pop up at an angle.

Use a plastic opening tool to open the silver flaps on either side of the RAM.

Once both flaps are released, the RAM should pop up at an angle.

Step 6

  • Grasp both sides of the RAM and pull to remove it.

Grasp both sides of the RAM and pull to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Alison Wendt

Member since: 04/18/2013

135 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 21-51, Johann Spring 2013                        

                                                  Member of Cal Poly, Team 21-51, Johann Spring 2013 



                    CPSU-JOHANN-S13S21G51                     


                                            3 Members                     


                                            12 Guides authored