Toshiba Nb250 108 Ram Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          3 minutes

Sections

RAM
3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackToshiba NB250-108
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Remove the battery

Save your work.
Turn off the computer. The LED Power must not light up anymore.
Disconnect all cables and devices connected to the computer.
Close the screen and place the computer face down as shown in the picture.
Slide the safety latch (on the left side of the picture) to the unlocked position (to the left) to activate the release.
Slide the battery release (pictured on the right) to the right side and hold it to release the battery and remove the battery from the back of the computer.

Save your work.

Turn off the computer. The LED Power must not light up anymore.

Disconnect all cables and devices connected to the computer.

Close the screen and place the computer face down as shown in the picture.

Slide the safety latch (on the left side of the picture) to the unlocked position (to the left) to activate the release.

Slide the battery release (pictured on the right) to the right side and hold it to release the battery and remove the battery from the back of the computer.

1024

Step 2

              Remove RAM cover

Remove the screw with a Phillips # 1 screwdriver securing the memory module cover. To remove the cover, use the recess below the screw and lift the cover upwards.
Now you see the RAM module in its socket. Carefully push the two metal clips outwards until the module is free and jumps upwards by about 30 degrees.

Remove the screw with a Phillips # 1 screwdriver securing the memory module cover. To remove the cover, use the recess below the screw and lift the cover upwards.

Now you see the RAM module in its socket. Carefully push the two metal clips outwards until the module is free and jumps upwards by about 30 degrees.

Step 3

              Remove RAM

Remove the RAM module by grasping it at the corners and pulling it to the right out of the socket.
Do not touch the gold contacts of the RAM module with your hand so as not to damage it.
Place the RAM module securely on the work surface.

Remove the RAM module by grasping it at the corners and pulling it to the right out of the socket.

Do not touch the gold contacts of the RAM module with your hand so as not to damage it.

Place the RAM module securely on the work surface.

Repeat the steps in reverse order to reassemble your device.

Cancel: I did not complete this guide.

        Corey Meyer is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Corey Meyer

Author

                                      with 1 other contributor

                    Guenter Hildebrandt

Member since: 12/16/2015

1,027 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

Member-Contributed Guide

Introduction

What you need