Difficulty
Moderate
Steps
10
Time Required
30 minutes
Sections
2
- Power Button
- 4 steps
- Speaker
- 6 steps
Flags
4
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba NB205 N330PK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Power Button
- Start by first removing the battery.
- Move the first release switch to the right position.
- Move the second release switch to the right position while pulling the battery towards the top of the netbook.
Start by first removing the battery.
Move the first release switch to the right position.
Move the second release switch to the right position while pulling the battery towards the top of the netbook.
1024
Step 2
- Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
- Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper
Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper
Step 3
- While holding the top of the netbook, flip the netbook over.
While holding the top of the netbook, flip the netbook over.
Step 4
- Carefully lift off the power bar assembly for access to the button and receiver.
Carefully lift off the power bar assembly for access to the button and receiver.
Step 5
Speaker
- Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.
Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.
Step 6
- Reach under the keyboard and disconnect the electrical connection.
- Lift the keyboard assembly out and away from the netbook.
Reach under the keyboard and disconnect the electrical connection.
Lift the keyboard assembly out and away from the netbook.
Step 7
- Remove the two noted screws, 5 mm in length, with a bit driver and Phillips 3/16" tool.
Remove the two noted screws, 5 mm in length, with a bit driver and Phillips 3/16" tool.
Step 8
- Remove this electrical connection with tweezers.
- Use a spudger to gently pry the bezel from retaining clips.
- This will allow the keyboard bezel to lift off of the body.
Remove this electrical connection with tweezers.
Use a spudger to gently pry the bezel from retaining clips.
This will allow the keyboard bezel to lift off of the body.
Step 9
- Use tweezers to remove the electrical connection to the old speaker assembly.
Use tweezers to remove the electrical connection to the old speaker assembly.
Step 10
- Use a bit driver and a Phillips #0 bit to remove the two retaining screws on the speaker assembly.
- Lift out the old speaker assembly.
Use a bit driver and a Phillips #0 bit to remove the two retaining screws on the speaker assembly.
Lift out the old speaker assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Mason McCaskill
Member since: 10/18/2013
1,000 Reputation
9 Guides authored
Badges:
9
+6 more badges
Team
Clemson, Team 14-2, Benson Fall 2013
Member of Clemson, Team 14-2, Benson Fall 2013
CLEM-BENSON-F13S14G2
3 Members
18 Guides authored
