Difficulty

Easy

Steps

7

Time Required

                          15 minutes

Sections

2

  • Power Button
  • 4 steps
  • Keyboard
  • 3 steps

Flags

4

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackToshiba NB205 N330PK

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Power Button
  • Start by first removing the battery.
  • Move the first release switch to the right position.
  • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

Start by first removing the battery.

Move the first release switch to the right position.

Move the second release switch to the right position while pulling the battery towards the top of the netbook.

1024

Step 2

  • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
  • Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

Using the bit driver and a Phillips #0 Bit, remove the two circled screws labelled F6. (These hold the keyboard) one screw may be under a rubber stopper

Step 3

  • While holding the top of the netbook, flip the netbook over.

While holding the top of the netbook, flip the netbook over.

Step 4

  • Carefully lift off the power bar assembly for access to the button and receiver.

Carefully lift off the power bar assembly for access to the button and receiver.

Step 5

              Keyboard
  • Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.

Use the spudger to gently pry around the keyboard. This will release the keyboard assembly from the body.

Step 6

  • Reach under the keyboard and disconnect the electrical connection.
  • Lift the broken keyboard off.

Reach under the keyboard and disconnect the electrical connection.

Lift the broken keyboard off.

Step 7

  • Reattach the new electrical connection into the old connection location.
  • Place the keyboard into the original location starting with the bottom first.
  • Gently press the keyboard down to secure it into its original location.

Reattach the new electrical connection into the old connection location.

Place the keyboard into the original location starting with the bottom first.

Gently press the keyboard down to secure it into its original location.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Mason McCaskill

Member since: 10/18/2013

1,000 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 14-2, Benson Fall 2013                        

                                                  Member of Clemson, Team 14-2, Benson Fall 2013 



                    CLEM-BENSON-F13S14G2                     


                                            3 Members                     


                                            18 Guides authored