Difficulty

Very easy

Steps

2

Time Required

                          10 minutes            

Sections

1

  • Keyboard
  • 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackToshiba NB100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Getting to the keyboard               
  • Remove the 3 screws holding the panel above the keyboard. The third one should be below the battery, so remove it as well
  • Use a spudger to pop the panel and remove it.

Remove the 3 screws holding the panel above the keyboard. The third one should be below the battery, so remove it as well

Use a spudger to pop the panel and remove it.

1024

Step 2

              Removing the old keyboard               
  • Remove the 2 screws holding the keyboard in place.
  • Carefully lift the keyboard and gently disconnect the cable.
  • Thats it. Remove the old keyboard and replace it with the new one.

Remove the 2 screws holding the keyboard in place.

Carefully lift the keyboard and gently disconnect the cable.

Thats it. Remove the old keyboard and replace it with the new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Simeon Brankov                     

Member since: 11/08/2020

3,455 Reputation

                                      41 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges