Difficulty

Moderate

Steps

9

Time Required

                          2 minutes

Sections

2

  • Battery
  • 3 steps
  • Keyboard
  • 6 steps

Flags

0

  • BackToshiba Mini NB505-N500BL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Located on the bottom of the laptop, find the two tabs shown in the picture and push both of them outwards away from the battery.

Located on the bottom of the laptop, find the two tabs shown in the picture and push both of them outwards away from the battery.

1024

Step 2

  • While pushing the tabs outwards, push on the raised bumps on the battery away from the laptop.

While pushing the tabs outwards, push on the raised bumps on the battery away from the laptop.

Step 3

  • The battery is now removed

The battery is now removed

Step 4

              Keyboard
  • Locate the five 1.2 mm Phillips # 000 screws inside of the battery housing.

Locate the five 1.2 mm Phillips # 000 screws inside of the battery housing.

Step 5

  • Using a Phillips head #000 screwdriver, carefully remove the five 1.2mm screws.

Using a Phillips head #000 screwdriver, carefully remove the five 1.2mm screws.

Step 6

  • Use a plastic pry tool to pop the tab holding the keyboard to the laptop.

Use a plastic pry tool to pop the tab holding the keyboard to the laptop.

Step 7

  • Remove plastic plate above keyboard.

Remove plastic plate above keyboard.

Step 8

  • Lift the keyboard gently away from the computer.
  • Do not attempt to fully remove the keyboard, as it is attached to the laptop by a ribbon cable.

Lift the keyboard gently away from the computer.

Do not attempt to fully remove the keyboard, as it is attached to the laptop by a ribbon cable.

Step 9

  • Locate the ribbon wire under the keyboard. Slide the white tabs forward and the keyboard will come loose.

Locate the ribbon wire under the keyboard. Slide the white tabs forward and the keyboard will come loose.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Owen Velho

Member since: 03/09/2016

427 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 7-7, Catania Spring 2016                        

                                                  Member of UMass Dartmouth, Team 7-7, Catania Spring 2016 



                    UMASSD-CATANIA-S16S7G7                     


                                            4 Members                     


                                            10 Guides authored