Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Power Button
- 4 steps
Flags
0
BackToshiba HD-A2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Button
- Using your hands, pop off the black console from each hinge surrounding the case.
- There are a total of 7 hinges.
Using your hands, pop off the black console from each hinge surrounding the case.
There are a total of 7 hinges.
1024
Step 2
- With the inside of the console facing up, the power button will be encased in clear plastic located on the right side of the console.
With the inside of the console facing up, the power button will be encased in clear plastic located on the right side of the console.
Step 3
- Use a Phillips #1 screwdriver to remove the single screw holding the power button to the console.
- After taking out the screw, the small piece of metal underneath will come loose. Carefully place this part aside.
Use a Phillips #1 screwdriver to remove the single screw holding the power button to the console.
After taking out the screw, the small piece of metal underneath will come loose. Carefully place this part aside.
Step 4
- Using your fingers, gently pull out the power button. You can push it from the outside to help loosen it from its hinges.
Using your fingers, gently pull out the power button. You can push it from the outside to help loosen it from its hinges.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Nouriyah Saleh
Member since: 10/22/2018
800 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
UC Davis, Team S11-G1, Lore Fall 2018
Member of UC Davis, Team S11-G1, Lore Fall 2018
UCD-LORE-F18S11G1
3 Members
6 Guides authored