Difficulty
Moderate
Steps
2
Time Required
10 - 20 minutes
Sections
1
- Motherboard
- 2 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missed a Step
Oops! This guide is currently missing some important steps.
BackToshiba Excite 7c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Place an iFixit opening tool in the seam between the screen and back casing.
- Apply pressure down all four sides to separate the back casing from the screen.
- Place the tablet face down and carefully remove the back panel.
Place an iFixit opening tool in the seam between the screen and back casing.
Apply pressure down all four sides to separate the back casing from the screen.
Place the tablet face down and carefully remove the back panel.
1024
Step 2
- Use a Phillips screwdriver to remove the five 6 mm screws from the motherboard.
- Use tweezers to gently disconnect the two ribbon cables.
- Pull straight up to remove the board.
Use a Phillips screwdriver to remove the five 6 mm screws from the motherboard.
Use tweezers to gently disconnect the two ribbon cables.
Pull straight up to remove the board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Adam Burdzel
Member since: 10/28/2015
304 Reputation
1 Guide authored
Badges:
13
+10 more badges
Team
UMass Dartmouth, Team 1-7, Miles Fall 2015
Member of UMass Dartmouth, Team 1-7, Miles Fall 2015
UMASSD-MILES-F15S1G7
3 Members
4 Guides authored
