Difficulty
Moderate
Steps
2
Time Required
4 - 7 minutes
Sections
1
- Antenna
- 2 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Excite 7c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Antenna
- To open your device use the plastic opener. Locate the seam on your device and gently separate applying pressure down all four sides.
- The back casing will start to peel away from the screen.
To open your device use the plastic opener. Locate the seam on your device and gently separate applying pressure down all four sides.
The back casing will start to peel away from the screen.
1024
Step 2
- You can locate the antenna underneath the motherboard as seen here.
- You do not need to remove the motherboard!
- There are two tabs located on the side of the antenna. You will need to release these tabs by slightly and gently pushing the tabs away from the antenna card.
- Pull the card out with your tweezers and replace with new antenna.
You can locate the antenna underneath the motherboard as seen here.
You do not need to remove the motherboard!
There are two tabs located on the side of the antenna. You will need to release these tabs by slightly and gently pushing the tabs away from the antenna card.
Pull the card out with your tweezers and replace with new antenna.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Reyna Serrato
Member since: 10/25/2014
96 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Gateway, Team 1-2, Johnson Fall 2014
Member of Gateway, Team 1-2, Johnson Fall 2014
GCC-JOHNSON-F14S1G2
2 Members
10 Guides authored
