Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Battery Removal
  • 5 steps
  • Speakers
  • 2 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackToshiba Excite 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery Removal
  • Remove the back cover.
  • Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.
  • After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

Remove the back cover.

Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.

After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

1024

Step 2

              Remove Tape
  • Remove any black tape from the device.
  • Keep the tape, you will need to put it back on when you are done.

Remove any black tape from the device.

Keep the tape, you will need to put it back on when you are done.

Step 3

              Unplug Wires
  • Unplug the wires from the battery.
  • The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Unplug the wires from the battery.

The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Step 4

              remove screws
  • Unscrew the battery from the device.
  • The device has 5 screws to remove, keep the screws.

Unscrew the battery from the device.

The device has 5 screws to remove, keep the screws.

Step 5

              Unclip and remove battery
  • The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.
  • Push the clip back then lift the battery up.

The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.

Push the clip back then lift the battery up.

Step 6

              Removing Speakers
  • Remove the speakers from the battery. The speakers are the plastic devices with the mesh on them.
  • Wires are wedged under a couple of clips on the battery (they run along the bottom and left edges of the battery).
  • Lightly coax the wires loose. The wiring harness and speakers come off the battery easily. Be sure to remove wires from clips.

Remove the speakers from the battery. The speakers are the plastic devices with the mesh on them.

Wires are wedged under a couple of clips on the battery (they run along the bottom and left edges of the battery).

Lightly coax the wires loose. The wiring harness and speakers come off the battery easily. Be sure to remove wires from clips.

Step 7

              Replacing Speaker
  • Place the new speakers exactly where you took the old ones from.
  • Lightly slide the wires underneath the clips the same way they were before the removal process.

Place the new speakers exactly where you took the old ones from.

Lightly slide the wires underneath the clips the same way they were before the removal process.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Sean Ulch

Member since: 01/15/2015

340 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-3, Tanski Winter 2015                        

                                                  Member of USF Tampa, Team 1-3, Tanski Winter 2015 



                    USFT-TANSKI-W15S1G3                     


                                            4 Members                     


                                            12 Guides authored