Toshiba Excite 7 Front Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

2

• Battery Removal
• 5 steps
• Front Facing Camera
• 4 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackToshiba Excite 7

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery Removal               

• Remove the back cover.
• Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.
• After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

Remove the back cover.

Work your fingernail or flat object under the cover’s seal. Start at the top right corner just above the front facing camera this is the device “Weak Spot”.

After you pry open the first clip slide the flat object along the perimeter of the cover until the cover is removable. You should hear the clips pop open.

1024

Step 2

              Remove Tape               

• Remove any black tape from the device.
• Keep the tape, you will need to put it back on when you are done.

Remove any black tape from the device.

Keep the tape, you will need to put it back on when you are done.

Step 3

              Unplug Wires               

• Unplug the wires from the battery.
• The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Unplug the wires from the battery.

The battery is the black rectangle in the middle of the device. The device has two wiring harnesses attached to it, one just above the battery and one just to the right.

Step 4

              remove screws               

• Unscrew the battery from the device.
• The device has 5 screws to remove, keep the screws.

Unscrew the battery from the device.

The device has 5 screws to remove, keep the screws.

Step 5

              Unclip and remove battery               

• The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.
• Push the clip back then lift the battery up.

The battery has one clip you will need to remove. The clip is located at the bottom right corner of the battery just above the right speaker. The speakers and wires are not secured to the battery, they may fall off.

Push the clip back then lift the battery up.

Step 6

              Unscrew circuit board               

• Remove the the remaining 3 screws to unfasten circuit board. Keep the screws.

Remove the the remaining 3 screws to unfasten circuit board. Keep the screws.

Step 7

              Removing data cables               

• The screen is connected to the circuit board by 2 “Data Cables” (orange ribbons). Data cables include 3 working components, data cables, the white harness plug, and the black lever.
• Gently flip the black cover up and unplug data cables.

The screen is connected to the circuit board by 2 “Data Cables” (orange ribbons). Data cables include 3 working components, data cables, the white harness plug, and the black lever.

Gently flip the black cover up and unplug data cables.

Step 8

              Removing circuit board               

• Remove the circuit board by gently coaxing it from the clips located just to the right of the circuit board.

Remove the circuit board by gently coaxing it from the clips located just to the right of the circuit board.

Step 9

              Removing Front Facing Camera               

• Flip the circuit board over, the camera is the small black square with the circle in the middle.
• Gently unplug the camera from the circuit board and plug the new camera back into the socket. Repeat steps in reverse order to reasemble device.

Flip the circuit board over, the camera is the small black square with the circle in the middle.

Gently unplug the camera from the circuit board and plug the new camera back into the socket. Repeat steps in reverse order to reasemble device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Martin Bucheli                     

Member since: 01/15/2015

264 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 1-3, Tanski Winter 2015                        

                                                  Member of USF Tampa, Team 1-3, Tanski Winter 2015 



                    USFT-TANSKI-W15S1G3                     


                                            4 Members                     


                                            12 Guides authored