Difficulty

Easy

Steps

8

Time Required

                          5 - 15 minutes

Sections

1

  • Hard Drive
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackToshiba Equium A210

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive
  • Close the laptop lid and turn the laptop over to place it top down on a stable, clear surface.
  • Position the laptop so that its battery compartment is nearest to you. You will notice that the labels on the underside of the laptop can be read easily as that are the right way around.

Close the laptop lid and turn the laptop over to place it top down on a stable, clear surface.

Position the laptop so that its battery compartment is nearest to you. You will notice that the labels on the underside of the laptop can be read easily as that are the right way around.

1024

Step 2

  • Locate the two battery release catches, as indicated by the yellow arrows in the photo.
  • Locating the catch on the right-hand side, move it away from the centre of the base of the laptop, in the direction of the arrow, to unlock the catch.
  • Locate the left-hand battery catch noting that this one is spring-loaded to return to the locked position.
  • Move and hold the left-hand catch away from the centre of the base of the machine.
  • Whilst holding the left-hand catch in the unlocked position, place a finger in the recess along the top edge of the battery and pull gently towards you. The battery can be removed without force.

Locate the two battery release catches, as indicated by the yellow arrows in the photo.

Locating the catch on the right-hand side, move it away from the centre of the base of the laptop, in the direction of the arrow, to unlock the catch.

Locate the left-hand battery catch noting that this one is spring-loaded to return to the locked position.

Move and hold the left-hand catch away from the centre of the base of the machine.

Whilst holding the left-hand catch in the unlocked position, place a finger in the recess along the top edge of the battery and pull gently towards you. The battery can be removed without force.

Step 3

  • Place the battery aside in a safe place.

Place the battery aside in a safe place.

Step 4

  • Locate the hard disc drive compartment plastic cover to the right of the Windows Certificate Of Authentication sticker.
  • Use a #1 Phillips screwdriver to loosen the two screws securing the hard disc drive cover
  • You do not need to completely remove the screws; just unscrew them enough for the cover to come free.

Locate the hard disc drive compartment plastic cover to the right of the Windows Certificate Of Authentication sticker.

Use a #1 Phillips screwdriver to loosen the two screws securing the hard disc drive cover

You do not need to completely remove the screws; just unscrew them enough for the cover to come free.

Step 5

  • Carefully ease the compartment cover by sliding it out from the base of the computer.
  • Removal does not require force. Be careful not to break the plastic cover.

Carefully ease the compartment cover by sliding it out from the base of the computer.

Removal does not require force. Be careful not to break the plastic cover.

Step 6

  • Check that there is no securing screw retaining the hard disc drive. If there is, use a #1 Phillips screw driver to completely remove the screw and set aside to a safe place.
  • Locate and reveal the transparent plastic tab attached to, and folded underneath, the hard disc drive cage.
  • Gently pull the tab towards the right to unplug the hard drive from the computer.

Check that there is no securing screw retaining the hard disc drive. If there is, use a #1 Phillips screw driver to completely remove the screw and set aside to a safe place.

Locate and reveal the transparent plastic tab attached to, and folded underneath, the hard disc drive cage.

Gently pull the tab towards the right to unplug the hard drive from the computer.

Step 7

  • Locate the four screws secure the hard disc drive to the cage, two on each side.
  • Use a #1 Phillips screwdriver to remove the screws

Locate the four screws secure the hard disc drive to the cage, two on each side.

Use a #1 Phillips screwdriver to remove the screws

Step 8

  • Set aside the screws in a safe place and remove the hard disc drive from the cage.

Set aside the screws in a safe place and remove the hard disc drive from the cage.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 3 other contributors 


                    Johnny Winter

Member since: 10/05/2012

329 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges