Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

1

  • Battery
  • 6 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackToshiba Encore 2 WT10-A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Start by holding your Toshiba tablet faced up.
  • Flip the tablet from left to right so that you are able to see the back of the tablet.
  • Hold tablet and be ready to continue onto the next steps.

Start by holding your Toshiba tablet faced up.

Flip the tablet from left to right so that you are able to see the back of the tablet.

Hold tablet and be ready to continue onto the next steps.

1024

Step 2

  • Insert a plastic opening tool in the back case of the tablet to free the clips.
  • Begin to pull the tool up slightly and work your way around the tablet to free all the clips.
  • Using a metal opening tool as shown in the photos has the potential to damage your device.

Insert a plastic opening tool in the back case of the tablet to free the clips.

Begin to pull the tool up slightly and work your way around the tablet to free all the clips.

Using a metal opening tool as shown in the photos has the potential to damage your device.

Step 3

  • Hold back lid with your right hand and keep lifting to remove the back lid.
  • Pull the back lid from right to left and top to bottom.
  • Once you disconnect the back lid, place lid aside.

Hold back lid with your right hand and keep lifting to remove the back lid.

Pull the back lid from right to left and top to bottom.

Once you disconnect the back lid, place lid aside.

Step 4

  • Use plastic spudger to remove the attached battery wires by pushing the plastic wire holder from right to left on top and bottom part of plastic holder.

Use plastic spudger to remove the attached battery wires by pushing the plastic wire holder from right to left on top and bottom part of plastic holder.

Step 5

  • Start by using your left hand on the top left corner on the battery.
  • Then, begin to lift and work your way around the battery.

Start by using your left hand on the top left corner on the battery.

Then, begin to lift and work your way around the battery.

Step 6

  • Remove the battery from the compartment.

Remove the battery from the compartment.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Eileen Morales

Member since: 04/08/2019

151 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Eastern Washington University, Team S1-G4, Rowley Spring 2019                        

                                                  Member of Eastern Washington University, Team S1-G4, Rowley Spring 2019 



                    EWU-ROWLEY-S19S1G4                     


                                            4 Members                     


                                            3 Guides authored