Difficulty
Moderate
Steps
11
Time Required
6 minutes
Sections
3
- Back Cover
- 5 steps
- Battery
- 3 steps
- Speakers
- 3 steps
Flags
0
BackToshiba Chromebook 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove all external devices from the Toshiba Chromebook 2.
Remove all external devices from the Toshiba Chromebook 2.
1024
Step 2
- Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.
Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.
Step 3
- Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.
Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.
Step 4
- Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.
- The rubber grips are glued in place, so you’ll need to peel them up with a spudger or other pry tool.
Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.
The rubber grips are glued in place, so you’ll need to peel them up with a spudger or other pry tool.
Step 5
- Remove the back panel by pulling up on 2 adjacent corners.
Remove the back panel by pulling up on 2 adjacent corners.
Step 6
Battery
- Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.
Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.
Step 7
- Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.
Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.
Step 8
- Remove the battery by gently pulling up on the bottom corners.
Remove the battery by gently pulling up on the bottom corners.
Step 9
Speakers
- Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.
Remove the 2 3.3 mm screws holding the left and right speakers with the Phillips #0 screwdriver.
Step 10
- Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.
Pull the red and white wires out of the socket above the left speaker to disconnect the speakers from the motherboard.
Step 11
- Remove the speakers by lifting upwards.
- Wiring connecting the left and right speakers may be taped to the top of the battery. Simply remove the tape to remove the speakers.
Remove the speakers by lifting upwards.
Wiring connecting the left and right speakers may be taped to the top of the battery. Simply remove the tape to remove the speakers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Alec Marnoch
Member since: 10/06/2016
233 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 10-4, Livingston Fall 2016
Member of Cal Poly, Team 10-4, Livingston Fall 2016
CPSU-LIVINGSTON-F16S10G4
4 Members
11 Guides authored
