Difficulty

Moderate

Steps

8

Time Required

                          5 minutes

Sections

2

  • Back Cover
  • 5 steps
  • Battery
  • 3 steps

Flags

0

  • BackToshiba Chromebook 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove all external devices from the Toshiba Chromebook 2.

Remove all external devices from the Toshiba Chromebook 2.

1024

Step 2

  • Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.

Close the Toshiba Chromebook 2 and turn it over so that the bottom of the laptop is facing upwards toward you with the lettering on the bottom facing right side up.

Step 3

  • Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.

Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver.

Step 4

  • Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.
  • The rubber grips are glued in place, so you’ll need to peel them up with a spudger or other pry tool.

Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver.

The rubber grips are glued in place, so you’ll need to peel them up with a spudger or other pry tool.

Step 5

  • Remove the back panel by pulling up on 2 adjacent corners.

Remove the back panel by pulling up on 2 adjacent corners.

Step 6

              Battery
  • Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.

Remove the 4 Phillips 2 mm screws holding the battery in place with the Phillips #0 screwdriver.

Step 7

  • Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.

Press down on the white clip and softly pull the wires out of the port to disconnect battery from the motherboard.

Step 8

  • Remove the battery by gently pulling up on the bottom corners.

Remove the battery by gently pulling up on the bottom corners.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      47 other people completed this guide.

Author

                                      with 8 other contributors 


                    Foster Chaney

Member since: 10/08/2015

726 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       IUPUI, Team 1-3, Hagerty Fall 2015                        

                                                  Member of IUPUI, Team 1-3, Hagerty Fall 2015 



                    IUPUI-HAGERTY-F15S1G3                     


                                            5 Members                     


                                            7 Guides authored

henrikahlberg94 - Feb 19, 2017

Reply

does the cb30-b-103 battery also work with the cb30-b-104 series?

Bill Brasier - Dec 19, 2017

Reply

I had four screws holding down battery.

When re-installing cover, don’t get confused. There are two holes under rubber feet on side CLOSEST TO HINGES. These do not accept the two screws - put them on side AWAY FROM HINGES.

Alexander Slaven - Mar 30, 2018

Reply

Good instructions, my chrome is back to normal again .

Chris Tighe - May 16, 2020

Reply

Many thanks but now there’s no curser! What do I do?

Chris in UK

steve smith - Jan 1, 2021

Reply

Thank you, easy to follow, works like a dream