Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- WLAN Wi-Fi PCB
- 6 steps
Flags
0
BackToshiba CB35-C3300 Chromebook 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
WLAN Wi-Fi PCB
- Remove the two rubber tabs near the front of the computer with a metal spudger and with PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.
Remove the two rubber tabs near the front of the computer with a metal spudger and with PH0 Phillips head screwdriver, carefully remove all ten screws and place in a safe location.
1024
Step 2
- Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.
Ensure that there is no debris, dust, or any other foreign materials blocking the Wi-Fi PCB.
Step 3
- Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.
Carefully peel back the yellow tape by either folding it back or removing it entirely. Use the same PH0 Phillips head screwdriver to remove the single screw that connects the motherboard to the Wi-Fi PCB.
Step 4
- When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.
When the screw has been removed, the board will naturally spring up. Carefully apply light pressure to back the PCB out of its port.
Step 5
- Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.
Disconnect the black wire that is plugged onto the 1 or AUX terminal by simply lightly pulling it from the board.
Step 6
- Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.
Disconnect the white wire from the 2 or Main plug by lightly pulling it from the PCB.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Gabriel Bryan
Member since: 11/26/2018
303 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S6-G6, Wilson Fall 2018
Member of IUPUI, Team S6-G6, Wilson Fall 2018
IUPUI-WILSON-F18S6G6
3 Members
6 Guides authored