Difficulty
Moderate
Steps
5
Time Required
20 - 30 minutes
Sections
2
- Front Cover
- 3 steps
- Mini LCD Screen
- 2 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackToshiba A1304T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Cover
- Open the phone so that it matches the photos to the left.
- Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.
Open the phone so that it matches the photos to the left.
Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.
1024
Step 2
- With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
- The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.
With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.
Step 3
- Insert the head of a flathead screwdriver into the seam between the front cover and the phone.
- Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.
- Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.
Insert the head of a flathead screwdriver into the seam between the front cover and the phone.
Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.
Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.
Step 4
Mini LCD Screen
- Using a small Phillips screwdriver, gently pry off the LCD screen from the board.
Using a small Phillips screwdriver, gently pry off the LCD screen from the board.
Step 5
- Using the head of the screwdriver, flip up the black tab connecting the ribbon-wire.
- Gently pull the LCD screen away from the board, the cable should come off with nearly no resistance.
Using the head of the screwdriver, flip up the black tab connecting the ribbon-wire.
Gently pull the LCD screen away from the board, the cable should come off with nearly no resistance.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Christopher
Member since: 04/22/2010
90 Reputation
8 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 16-6, Maness Spring 2010
Member of Cal Poly, Team 16-6, Maness Spring 2010
CPSU-MANESS-S10S16G6
4 Members
16 Guides authored