Toshiba A1304T Main Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 - 30 minutes

Sections

Front Cover
3 steps
Main LCD Screen
3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackToshiba A1304T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Cover

Open the phone so that it matches the photos to the left.
Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

Open the phone so that it matches the photos to the left.

Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

1024

Step 2

With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.

The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

Step 3

Insert the head of a flathead screwdriver into the seam between the front cover and the phone.
Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.
Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Insert the head of a flathead screwdriver into the seam between the front cover and the phone.

Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.

Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Step 4

              Main LCD Screen

Using the head of the flathead screwdriver, gently pry the black tab so that it rests in a vertical (or “unlocked”) position.
Pull the orange ribbon-wire to the left, removing it from the white socket.

Using the head of the flathead screwdriver, gently pry the black tab so that it rests in a vertical (or “unlocked”) position.

Pull the orange ribbon-wire to the left, removing it from the white socket.

Step 5

Just as before, use the head of the flathead screwdriver to pry the black tab into a vertical position, as shown.
Pull the ribbon wire to the right, freeing it from its socket.

Just as before, use the head of the flathead screwdriver to pry the black tab into a vertical position, as shown.

Pull the ribbon wire to the right, freeing it from its socket.

Step 6

Using the head of the flathead screwdriver, pry the silver plastic casing of the LCD from the video logic board.
Repeat as necessary around the device until the silver plastic casing is free.
Attempting to further separate the LCD screen from the silver plastic casing will likely result in severe damage to the screen.

Using the head of the flathead screwdriver, pry the silver plastic casing of the LCD from the video logic board.

Repeat as necessary around the device until the silver plastic casing is free.

Attempting to further separate the LCD screen from the silver plastic casing will likely result in severe damage to the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors

                    Christopher

Member since: 04/22/2010

90 Reputation

                                      8 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 16-6, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 16-6, Maness Spring 2010 



                    CPSU-MANESS-S10S16G6                     


                                            4 Members                     


                                            16 Guides authored

Action Shots#

Needs Better Images#

Introduction#

What you need#

Team#

Action Shots

Needs Better Images

Introduction

What you need

Team