Difficulty
Moderate
Steps
7
Time Required
10 - 20 minutes
Sections
3
- Casing
- 2 steps
- Wheel
- 2 steps
- Rear Wheel Suspension
- 3 steps
Flags
0
BackTorque King Electric RTR RC Monster Truck
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Casing
- From the top view, remove each of the four pins that hold the casing in place.
From the top view, remove each of the four pins that hold the casing in place.
1024
Step 2
- Slowly pull the casing up to remove it.
Slowly pull the casing up to remove it.
Step 3
Removing Screws
- Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.
Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.
Step 4
Removing the Wheel
- Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.
Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.
Step 5
Rear Wheel Suspension
- After removing the rear wheels, remove the 8mm screw under each spring with a Phillips 1 screwdriver.
After removing the rear wheels, remove the 8mm screw under each spring with a Phillips 1 screwdriver.
Step 6
- Slide off the bottom part of the rod connected to the chassis.
Slide off the bottom part of the rod connected to the chassis.
Step 7
- Pull the black washer inside the spring downwards and towards the truck’s rear simultaneously in order to remove the suspension.
Pull the black washer inside the spring downwards and towards the truck’s rear simultaneously in order to remove the suspension.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Colton Sholtis
Member since: 01/30/2015
257 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 6-30, Amido Winter 2015
Member of Cal Poly, Team 6-30, Amido Winter 2015
CPSU-AMIDO-W15S6G30
4 Members
8 Guides authored