Torque King Electric Rtr Rc Monster Truck Battery Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          3 - 5 minutes            

Sections

1

• Battery
• 3 steps

Flags

0

• BackTorque King Electric RTR RC Monster Truck

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Beginning at the bottom of the truck, twist the release clip on the casing until the release clip is no longer covering the battery casing.

Beginning at the bottom of the truck, twist the release clip on the casing until the release clip is no longer covering the battery casing.

1024

Step 2

• Next, use a Phillips 00 screwdriver to remove the 8mm screw on the battery casing and remove the battery casing.

Next, use a Phillips 00 screwdriver to remove the 8mm screw on the battery casing and remove the battery casing.

Step 3

• Do not skip this step if you are continuing onto the next step, you will risk electric shock.
• Finally, remove the battery from the white connector by squeezing the clip on the connector while pulling.

Do not skip this step if you are continuing onto the next step, you will risk electric shock.

Finally, remove the battery from the white connector by squeezing the clip on the connector while pulling.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Thomas White                     

Member since: 02/02/2015

252 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 6-30, Amido Winter 2015                        

                                                  Member of Cal Poly, Team 6-30, Amido Winter 2015 



                    CPSU-AMIDO-W15S6G30                     


                                            4 Members                     


                                            8 Guides authored                     

Franq - Dec 3, 2020

Reply

Heeft u ook een suggestie om de oplaadbare batterij geheel te vervangen als hij niet meer oplaadt? Einde levensduur..

Kun je daar zomaar een andere oplaadbare batterij in steken (openknippen en contactpunten opnieuw vastzetten?

Of kun je eventueel een ‘gewone’ 9V batterij in plaats van de die oplaadbare, verbinden? Dus kabeltje doorknippen en een 9V stekkertje plaatsen?

Dank u.