Difficulty
Easy
Steps
4
Time Required
2 minutes
Sections
2
- Casing
- 2 steps
- Antenna
- 2 steps
Flags
0
BackTorque King Electric RTR RC Monster Truck
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Casing
- From the top view, remove each of the four pins that hold the casing in place.
From the top view, remove each of the four pins that hold the casing in place.
1024
Step 2
- Slowly pull the casing up to remove it.
Slowly pull the casing up to remove it.
Step 3
Loosen Screw
- Loosen the 10mm screw surrounded by the copper using a #2 Phillips head screwdriver.
- The wire that connects the antenna to the circuitry of the truck might be blocking the screw. Take care when moving the wire out of the way not to pull it from its soldering.
Loosen the 10mm screw surrounded by the copper using a #2 Phillips head screwdriver.
The wire that connects the antenna to the circuitry of the truck might be blocking the screw. Take care when moving the wire out of the way not to pull it from its soldering.
Step 4
Remove Antenna
- Carefully slide the antenna out from under the screw and remove.
Carefully slide the antenna out from under the screw and remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Colton Sholtis
Member since: 01/30/2015
257 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 6-30, Amido Winter 2015
Member of Cal Poly, Team 6-30, Amido Winter 2015
CPSU-AMIDO-W15S6G30
4 Members
8 Guides authored