Tomtom Via 1605Tm Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Front Screen
4 steps
Speaker
2 steps

Flags

BackTomTom VIA 1605TM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Screen

Locate the round suction cup on the back of the device.
Twist the suction cup clockwise or counterclockwise while pulling back away from the device closer to your body until removed.
When reassembling twist the suction cup but, push in as oppose to pulling out.

Locate the round suction cup on the back of the device.

Twist the suction cup clockwise or counterclockwise while pulling back away from the device closer to your body until removed.

When reassembling twist the suction cup but, push in as oppose to pulling out.

1024

Step 2

Location of screw is where the suction cup was.
Insert 8mm Hex #T6 screw driver into screw.
Unscrew in counter clockwise direction.
When reassembling screw in the clockwise direction.

Location of screw is where the suction cup was.

Insert 8mm Hex #T6 screw driver into screw.

Unscrew in counter clockwise direction.

When reassembling screw in the clockwise direction.

Step 3

Pry along the edges with the plastic opening tool to separate the back and front panel.
Try not to tear the screen open as you may break the part. Go about this gently but with enough force to remove the screen.

Pry along the edges with the plastic opening tool to separate the back and front panel.

Try not to tear the screen open as you may break the part. Go about this gently but with enough force to remove the screen.

Step 4

Place the new front panel (with new screen) on to the back panel. Press firmly along the edges to attach.
Only do this step of placing the front panel on if you are completed. If there are still components needed replacing postpone this step until the end.

Place the new front panel (with new screen) on to the back panel. Press firmly along the edges to attach.

Only do this step of placing the front panel on if you are completed. If there are still components needed replacing postpone this step until the end.

Step 5

              Speaker

Keep the TOMTOM oriented so the curve is on the bottom. Locate the four 1mm Philips #J1 head screws attached to the motherboard behind the LCD Screen.
Unscrew each of these in a counter clockwise direction.
When reassembling screw back in a clockwise direction.
The second picture is to represent where the four screws are located. The LCD screen does not disconnect from the motherboard in this particular guide.

Keep the TOMTOM oriented so the curve is on the bottom. Locate the four 1mm Philips #J1 head screws attached to the motherboard behind the LCD Screen.

Unscrew each of these in a counter clockwise direction.

When reassembling screw back in a clockwise direction.

The second picture is to represent where the four screws are located. The LCD screen does not disconnect from the motherboard in this particular guide.

Step 6

Remove speaker from slot on back panel by prying out of the rubber/plastic case with the plastic opening tool. If this does not work the metal spudger is okay for this step.
Remove the existing speaker from it’s connection to the motherboard by pinching both sides of the connector.
Pull back away (in the opposite direction) from the connector.
When reassembling push back into connector. Do not need to pinch anything. The “click” sound insures solid connection.

Remove speaker from slot on back panel by prying out of the rubber/plastic case with the plastic opening tool. If this does not work the metal spudger is okay for this step.

Remove the existing speaker from it’s connection to the motherboard by pinching both sides of the connector.

Pull back away (in the opposite direction) from the connector.

When reassembling push back into connector. Do not need to pinch anything. The “click” sound insures solid connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Kevin MacAllister

Member since: 10/19/2015

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 4-4, Catania Fall 2015                        

                                                  Member of UMass Dartmouth, Team 4-4, Catania Fall 2015 



                    UMASSD-CATANIA-F15S4G4                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team