Difficulty
Easy
Steps
4
Time Required
3 minutes
Sections
1
- Front Screen
- 4 steps
Flags
0
BackTomTom VIA 1605TM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Screen
- Locate the round suction cup on the back of the device.
- Twist the suction cup clockwise or counterclockwise while pulling back away from the device closer to your body until removed.
- When reassembling twist the suction cup but, push in as oppose to pulling out.
Locate the round suction cup on the back of the device.
Twist the suction cup clockwise or counterclockwise while pulling back away from the device closer to your body until removed.
When reassembling twist the suction cup but, push in as oppose to pulling out.
1024
Step 2
- Location of screw is where the suction cup was.
- Insert 8mm Hex #T6 screw driver into screw.
- Unscrew in counter clockwise direction.
- When reassembling screw in the clockwise direction.
Location of screw is where the suction cup was.
Insert 8mm Hex #T6 screw driver into screw.
Unscrew in counter clockwise direction.
When reassembling screw in the clockwise direction.
Step 3
- Pry along the edges with the plastic opening tool to separate the back and front panel.
- Try not to tear the screen open as you may break the part. Go about this gently but with enough force to remove the screen.
Pry along the edges with the plastic opening tool to separate the back and front panel.
Try not to tear the screen open as you may break the part. Go about this gently but with enough force to remove the screen.
Step 4
- Place the new front panel (with new screen) on to the back panel. Press firmly along the edges to attach.
- Only do this step of placing the front panel on if you are completed. If there are still components needed replacing postpone this step until the end.
Place the new front panel (with new screen) on to the back panel. Press firmly along the edges to attach.
Only do this step of placing the front panel on if you are completed. If there are still components needed replacing postpone this step until the end.
To reassemble your device, follow these instructions in reverse order. Now you’re done and your device is ready to use!
Cancel: I did not complete this guide.
Author
with 2 other contributors
Tyler Wade
Member since: 10/15/2015
362 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 4-4, Catania Fall 2015
Member of UMass Dartmouth, Team 4-4, Catania Fall 2015
UMASSD-CATANIA-F15S4G4
4 Members
5 Guides authored
curtisibley - May 31, 2016
Reply
where can I purchase a front screen for my tom tom via 1605 TM