Difficulty
Easy
Steps
8
Time Required
15 minutes
Sections
2
- Back Panel
- 4 steps
- Battery
- 4 steps
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackTomTom One XL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Remove the 4 .4mm screws on the back of the device.
Remove the 4 .4mm screws on the back of the device.
1024
Step 2
- Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.
- You can rotate TOMTOM XL to make prying back off easier.
- Be careful not to injure the two wires connecting the pieces.
Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.
You can rotate TOMTOM XL to make prying back off easier.
Be careful not to injure the two wires connecting the pieces.
Step 3
- After prying both halves apart, they will be connected by two wires.
- Carefully set the two halves next to each other making sure not to stress or damage the wires.
After prying both halves apart, they will be connected by two wires.
Carefully set the two halves next to each other making sure not to stress or damage the wires.
Step 4
- Using the tweezers separate the wires connecting the battery and speaker to the mother board.
- Be gentle while pulling the wires out, the plugs are easily injured.
Using the tweezers separate the wires connecting the battery and speaker to the mother board.
Be gentle while pulling the wires out, the plugs are easily injured.
Step 5
Battery
- Using metal palate knife pry the battery from the back panel.
Using metal palate knife pry the battery from the back panel.
Step 6
- Place the backside of the battery on the sticky side of the double sided tape.
- Using the tech knife, trim the extra tape to the size of the battery.
- The tech knife is sharp, be careful when cutting the tape.
Place the backside of the battery on the sticky side of the double sided tape.
Using the tech knife, trim the extra tape to the size of the battery.
The tech knife is sharp, be careful when cutting the tape.
Step 7
- Remove the back of the double sided tap.
- Place the new battery back inside the back panel of TOMTOM XL.
- Make sure the wire from the battery is going in the correct direction.
Remove the back of the double sided tap.
Place the new battery back inside the back panel of TOMTOM XL.
Make sure the wire from the battery is going in the correct direction.
Step 8
- Reconnect the battery ribbon cable to its port.
Reconnect the battery ribbon cable to its port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
DeVhan
Member since: 03/11/2015
401 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
Colorado Springs, Team 9-6, Panko Spring 2015
Member of Colorado Springs, Team 9-6, Panko Spring 2015
UCCS-PANKO-S15S9G6
3 Members
5 Guides authored