Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • Motherboard
  • 7 steps

Flags

0

  • BackTomTom ONE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.

Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.

1024

Step 2

  • Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.

Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.

Step 3

  • Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device.

Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device.

Step 4

  • Once the two covers are separated, use tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover.

Once the two covers are separated, use tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover.

Step 5

  • Next, you must remove the motherboard from the front screen.
  • Use a Torx T-7 screwdriver to unscrew the two screws.

Next, you must remove the motherboard from the front screen.

Use a Torx T-7 screwdriver to unscrew the two screws.

Step 6

  • Before you can seperate the motherboard from the front cover, you must disconnect the wire connecting the two.
  • To do so, you must use the back end of the spudger to push out the two white tabs connected to the wire, that holds the motherboard and front cover together.

Before you can seperate the motherboard from the front cover, you must disconnect the wire connecting the two.

To do so, you must use the back end of the spudger to push out the two white tabs connected to the wire, that holds the motherboard and front cover together.

Step 7

  • The motherboard is now disconnected from the front assembly

The motherboard is now disconnected from the front assembly

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors 


                    Becca

Member since: 04/16/2010

202 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 7-7, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 7-7, Maness Spring 2010 



                    CPSU-MANESS-S10S7G7                     


                                            4 Members                     


                                            6 Guides authored