Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes            

Sections

1

  • LCD and Touchscreen
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackTomTom One 310

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD and Touchscreen               
  • Here is the TomTom with a clearly visible damage. The LCD did work, but for obvious reasons the digitizer did not.
  • Use a plastic opening tool and insert it between the outside of the bezel and the plastic case. It will need some effort, but the plastic of the case does have enough give to make it possible.
  • Continue to work the tool around the bezel. There are multiple plastic tabs that need to be released

Here is the TomTom with a clearly visible damage. The LCD did work, but for obvious reasons the digitizer did not.

Use a plastic opening tool and insert it between the outside of the bezel and the plastic case. It will need some effort, but the plastic of the case does have enough give to make it possible.

Continue to work the tool around the bezel. There are multiple plastic tabs that need to be released

1024

Step 2

  • Continue to move the tool to the outside edges,
  • then along the sides
  • and finally the top.

Continue to move the tool to the outside edges,

then along the sides

and finally the top.

Step 3

  • Once all the tabs are released, carefully lift the bezel up and remove it.
  • Now the 8 holding tabs are visible
  • Remove the 4 Phillips screws that connect the LCD holder

Once all the tabs are released, carefully lift the bezel up and remove it.

Now the 8 holding tabs are visible

Remove the 4 Phillips screws that connect the LCD holder

Step 4

  • Here are the four coarse threaded 3mm long screws.
  • The LCD holder shows three metal tabs on the bottom that hold it to the plastic case. Use the plastic opening tool to clear those tabs.
  • There are two metal tabs at the top that hold it to the plastic case.Use the plastic opening tool to clear those tabs.

Here are the four coarse threaded 3mm long screws.

The LCD holder shows three metal tabs on the bottom that hold it to the plastic case. Use the plastic opening tool to clear those tabs.

There are two metal tabs at the top that hold it to the plastic case.Use the plastic opening tool to clear those tabs.

Step 5

  • Remove the LCD holder
  • Here is the LCD without the holder. There is a rubber gasket placed around the outside of the LCD. Note its position
  • Lift the LCD gently out of the plastic case and fold it toward the bottom of the case. The display cable is still connected and may tear if this is done in either the wrong direction or to forceful.

Remove the LCD holder

Here is the LCD without the holder. There is a rubber gasket placed around the outside of the LCD. Note its position

Lift the LCD gently out of the plastic case and fold it toward the bottom of the case. The display cable is still connected and may tear if this is done in either the wrong direction or to forceful.

Step 6

  • LCD flipped toward the bottom of the case. The display cable is still connected.
  • Use a pick or similar tool to gently move the locking tab. First the bottom,
  • Then the top until the locking tab is released and the display cable can be removed.

LCD flipped toward the bottom of the case. The display cable is still connected.

Use a pick or similar tool to gently move the locking tab. First the bottom,

Then the top until the locking tab is released and the display cable can be removed.

Step 7

  • Remove the display assembly. A new display assembly can now be installed.
  • Final result is a refreshed looking and working TomTom

Remove the display assembly. A new display assembly can now be installed.

Final result is a refreshed looking and working TomTom

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    oldturkey03                     

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges                           

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored                     

marilyn - Jul 7, 2015

Reply

How to fix my windows