Difficulty
Easy
Steps
5
Time Required
20 minutes
Sections
1
- Lithium Ion Battery
- 5 steps
Flags
0
BackTomTom Go 60 S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lithium Ion Battery
- Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.
Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.
1024
Step 2
- Your device should now look like this. Make sure to disconnect the screen from the motherboard by removing the flap connecting both, so you have ample room to work on the device.
Your device should now look like this. Make sure to disconnect the screen from the motherboard by removing the flap connecting both, so you have ample room to work on the device.
Step 3
- Remove all the screws that are marked in the image with a Philips #000 screwdriver and over a magnetic work mat.
Remove all the screws that are marked in the image with a Philips #000 screwdriver and over a magnetic work mat.
Step 4
- Disconnect battery wires from motherboard, so that you can remove the Lithium-Ion battery.
Disconnect battery wires from motherboard, so that you can remove the Lithium-Ion battery.
Step 5
- Detach from holster and replace Lithium-Ion battery.
Detach from holster and replace Lithium-Ion battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Tomy Peralta
Member since: 10/04/2016
118 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
USF Tampa, Team 1-6, Nance Fall 2016
Member of USF Tampa, Team 1-6, Nance Fall 2016
USFT-NANCE-F16S1G6
4 Members
5 Guides authored