Difficulty

Easy

Steps

6

Time Required

                          10 - 25 minutes

Sections

1

  • Toastmaster TMHP2 Disassembly
  • 6 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackToastmaster TMHP2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Your hot pot receives power from a typical wall outlet through its white cord. A faulty cord will produce no power to the pot.

Be sure to test your hot pot before disassembly in order to confirm that it’s either working or not working. If the base appears to be heating up after the heat dial is turned, your hot pot is working! If not however, you will need to check the inside to determine the source for the hot pot’s defectivity.

Before disassembly, make sure the device is unplugged and turned off (not hot). Be careful when disassembling as there may be some pointy parts.

What you need

Step 1

              Toastmaster TMHP2 Disassembly
  • Remove the lid and flip the pot over.

Remove the lid and flip the pot over.

1024

Step 2

  • Use the plastic opening tool to remove the three rubber feet.

Use the plastic opening tool to remove the three rubber feet.

Step 3

  • Using the Phillips #1 screwdriver, remove the three 11 mm screws from the bottom of the device.

Using the Phillips #1 screwdriver, remove the three 11 mm screws from the bottom of the device.

Step 4

  • Lift up the bottom cover to expose the internal wiring and components.

Lift up the bottom cover to expose the internal wiring and components.

Step 5

  • Using the Phillips #1 screwdriver, remove the two 8 mm screws securing the thermal switch.
  • Remove the bracket securing the thermal switch from the device.

Using the Phillips #1 screwdriver, remove the two 8 mm screws securing the thermal switch.

Remove the bracket securing the thermal switch from the device.

Step 6

  • Congratulations! You have disassembled the hot pot and can now see its internal compnents.

Congratulations! You have disassembled the hot pot and can now see its internal compnents.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    William Xia

Member since: 09/16/2021

233 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Tufts University School of Engineering, Team 1-10, Bell Fall 2021                        

                                                  Member of Tufts University School of Engineering, Team 1-10, Bell Fall 2021 



                    TUFTS-BELL-F21S1G10                     


                                            2 Members                     


                                            1 Guide authored