Difficulty
Moderate
Steps
3
Time Required
20 minutes
Sections
1
- The connection cable in the control unit
- 3 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackTiptoi Stift der 2. Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Changing the battery and connecting it to the PC doesn’t help, so I unscrew the part.
There is a flat connection cable from the electronics to the control unit, disconnect the cable and treat the contacts with contact spray, then the pen works again.
What you need
Step 1
The connection cable in the control unit
- Remove batteries
Remove batteries
1024
Step 2
- Loosen the 4 screws with a small Phillips screwdriver.
- Open the case.
Loosen the 4 screws with a small Phillips screwdriver.
Open the case.
Step 3
- Carefully fold the black plastic part upwards, then pull out the flat cable with tweezers.
- Treat the connector with contact spray.
- Carefully insert the flat cable again, with the blue marking facing upwards, fold the black plastic part down again.
- Put the pen back together.
Carefully fold the black plastic part upwards, then pull out the flat cable with tweezers.
Treat the connector with contact spray.
Carefully insert the flat cable again, with the blue marking facing upwards, fold the black plastic part down again.
Put the pen back together.
Reverse the steps to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Brant Urban
Mariah Adams
Fabian Neidhardt
Author
with 1 other contributor
Peter Müller
Member since: 05/02/2021
127 Reputation
1 Guide authored
Badges:
3