Timex T132 Imac Alarm Clock Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          1 - 5 minutes

Sections

Battery
3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackTimex T132 “iMac” Alarm Clock
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

To prevent any injury, unplug the power cord from the outlet so the device is powered off.
Hold the clock so it is upside down. You should be able to view its caution labels.
Wedge the small tip plastic opening tool between the battery cover and the edge of its slot.
Firmly push against the battery cover (away from its outer edge) until it slides off of the base clock.

To prevent any injury, unplug the power cord from the outlet so the device is powered off.

Hold the clock so it is upside down. You should be able to view its caution labels.

Wedge the small tip plastic opening tool between the battery cover and the edge of its slot.

Firmly push against the battery cover (away from its outer edge) until it slides off of the base clock.

1024

Step 2

Rotate the device so the clock’s display is facing away from you.
Use the flat end of the spudger to pry out the battery.
Once fully lifted, grab the end of the battery and pull out the rest of the battery.
Do not remove the battery all the way because it is still connected. Doing so may result in damaging the power wires.

Rotate the device so the clock’s display is facing away from you.

Use the flat end of the spudger to pry out the battery.

Once fully lifted, grab the end of the battery and pull out the rest of the battery.

Do not remove the battery all the way because it is still connected. Doing so may result in damaging the power wires.

Step 3

Place the clock upside down on a flat surface.
Because the device is irregularly shaped, you may have to manually or externally balance it.
Grab the blue connector covering tab near the power wires and peel the snap connector off the battery terminals to disconnect it.
Do not pull out the snap connector and its wires because it is still connected to the device. Doing so may result in damaging the power wires.
Remove the battery.

Place the clock upside down on a flat surface.

Because the device is irregularly shaped, you may have to manually or externally balance it.

Grab the blue connector covering tab near the power wires and peel the snap connector off the battery terminals to disconnect it.

Do not pull out the snap connector and its wires because it is still connected to the device. Doing so may result in damaging the power wires.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Tyler Price

Member since: 04/07/2014

948 Reputation

                                      6 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team 6-2, Forte Spring 2014                        

                                                  Member of Cal Poly, Team 6-2, Forte Spring 2014 



                    CPSU-FORTE-S14S6G2                     


                                            5 Members                     


                                            20 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Member-Contributed Guide

Introduction

What you need

Team