Difficulty

Moderate

Steps

7

Time Required

                          30 - 45 minutes

Sections

1

  • Whole Clip Bracket
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackTimbuk2 Pannier

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Whole Clip Bracket
  • Here are the tools you will need:
  • Standard Screwdriver
  • New Pannier Whole Clip Bracket
  • Wrench

Here are the tools you will need:

Standard Screwdriver

New Pannier Whole Clip Bracket

Wrench

1024

Step 2

  • To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

To remove clip bracket, first remove all 3 clips using the #2 screwdriver or hand drill (Make sure to put clips and their screws and anchor plates in a safe place as to not misplace any such as a Ziploc bag).

Step 3

  • Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

Unscrew all 13 small black screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier.

Step 4

  • While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

While holding nuts with the wrench, use the screwdriver to unscrew the screw in the front bracket.

Step 5

  • Remove old clip. Take new clip bracket and unscrew and remove middle clip.

Remove old clip. Take new clip bracket and unscrew and remove middle clip.

Step 6

  • Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.
  • As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

Replace the middle clip and screw it into place on the bag. Place the new clip bracket in place and screw in all 13 screws again.

As in step 3 and 4, hold nut with wrench while screwing clip in place. (Be sure to keep washers in between the screws and the body of the bag)

Step 7

  • You’re done!

You’re done!

Cancel: I did not complete this guide.

Author

                    Emilee

Member since: 03/13/2014

1,591 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges