Difficulty
Moderate
Steps
4
Time Required
20 - 30 minutes
Sections
1
- Bottom Stay Bracket
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackTimbuk2 Pannier
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Bottom Stay Bracket
- Tools needed:
- New Pannier Bottom Stay Bracket.
- Standard Screwdriver
- Wrench
Tools needed:
New Pannier Bottom Stay Bracket.
Standard Screwdriver
Wrench
1024
Step 2
- To remove bottom stay bracket, first unscrew all 4 screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier, while using the screwdriver to unscrew the screw in the front bracket.
To remove bottom stay bracket, first unscrew all 4 screws. To do so, undo velcro flap located at the top of the laptop sleeve. With the wrench, hold nut in place in the back of the pannier, while using the screwdriver to unscrew the screw in the front bracket.
Step 3
- Remove old clip. Take new bottom bracket and remove all screws and washers from bracket (Make sure to put all screws, washers, and nuts in a safe place (Ziploc bag) as to not lose any!)
- Follow step 2 in reverse order to attach new clip bracket. (Hold nut with wrench while screwing back in place. Also make sure the washers are between the screws and the body of the bag.)
Remove old clip. Take new bottom bracket and remove all screws and washers from bracket (Make sure to put all screws, washers, and nuts in a safe place (Ziploc bag) as to not lose any!)
Follow step 2 in reverse order to attach new clip bracket. (Hold nut with wrench while screwing back in place. Also make sure the washers are between the screws and the body of the bag.)
Step 4
- All Done!
All Done!
Cancel: I did not complete this guide.
Author
Emilee
Member since: 03/13/2014
1,591 Reputation
9 Guides authored
Badges:
9
+6 more badges