Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
1
- Battery Spring
- 6 steps
Flags
0
BackTexas Instruments TI-84 Plus Silver Edition
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Spring
- Unscrew all six 8.5mm screws in the back of the calculator using the T6 star screw bit.
Unscrew all six 8.5mm screws in the back of the calculator using the T6 star screw bit.
1024
Step 2
- Use a plastic opening tool to pry the calculator open.
- Use your hands to firmly grasp and pull apart the calculator when a reasonable gap has been made.
Use a plastic opening tool to pry the calculator open.
Use your hands to firmly grasp and pull apart the calculator when a reasonable gap has been made.
Step 3
- Remove the battery in order to access the battery spring that needs to be replaced.
Remove the battery in order to access the battery spring that needs to be replaced.
Step 4
- Remove the damaged spring using the tweezers.
Remove the damaged spring using the tweezers.
Step 5
- Pick up the new spring with the tweezers.
- Insert the new spring with the tweezers.
- Gently push the new spring into place using your finger.
Pick up the new spring with the tweezers.
Insert the new spring with the tweezers.
Gently push the new spring into place using your finger.
Step 6
- Test by replacing the battery that was taken out to check the connection.
Test by replacing the battery that was taken out to check the connection.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Clayton Rudolph
Member since: 09/15/2020
133 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team S3-G3, Willis Fall 2020
Member of University of Memphis, Team S3-G3, Willis Fall 2020
UM-WILLIS-F20S3G3
1 Member
1 Guide authored
