Thustmaster Ferrari 458 Spider Racing Wheel And Pedal Connection Port Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Bottom Cover
2 steps
Wheel and Pedal Connection Port
1 step

Flags

BackThrustmaster Ferrari 458 Spider Racing Wheel
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover

Remove the black 10mm using a JIS #1 screw driver.
There are 12 screws.
Two of the screws are deep inside the device you might need to use a slim screwdriver.
In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

Remove the black 10mm using a JIS #1 screw driver.

There are 12 screws.

Two of the screws are deep inside the device you might need to use a slim screwdriver.

In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

1024

Step 2

Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.
Gently pull apart both halves of device to access inside.

Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

Gently pull apart both halves of device to access inside.

Step 3

              Wheel and Pedal Connection Port

Using a small plastic opening tool, gently pry up the white connector that connects the pedals to the board.
By pulling up on both ends of the port you will be able to pull out the port to remove it.

Using a small plastic opening tool, gently pry up the white connector that connects the pedals to the board.

By pulling up on both ends of the port you will be able to pull out the port to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Mario Nunez

Member since: 10/18/2017

403 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G33, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G33, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G33                     


                                            4 Members                     


                                            5 Guides authored

TheComfyCompie - Jan 21, 2018

I just need to know where to get a replacement USB cable from ( the USB to the circular end part).

Susan Witter - Feb 14, 2018

I need to know what USB cable connects the round cable end on the steerwheel to the Xbox one

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team