Thrustmaster T Flight Hotas 4 R2 L2 Buttons Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          15 minutes            

Sections

3

• J1 Screws on Throttle
• 1 step
• Throttle Panel
• 1 step
• R2 & L2 Buttons
• 5 steps

Flags

0

• BackThrustmaster T Flight Hotas 4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              J1 Screws on Throttle               

• Be sure to disconnect the controller from the power source before disassembling.
• Remove the five 15 mm J1 JIS head screws from the front of the throttle.

Be sure to disconnect the controller from the power source before disassembling.

Remove the five 15 mm J1 JIS head screws from the front of the throttle.

1024

Step 2

              Throttle Panel               

• Be sure to disconnect the controller from the power source before disassembling.
• Using your hands, pull away the panel from the throttle.

Using your hands, pull away the panel from the throttle.

Step 3

              R2 & L2 Buttons               

• Remove the two 7 mm J1 JIS head screws from the panel covering the buttons.

Remove the two 7 mm J1 JIS head screws from the panel covering the buttons.

Step 4

• Pull the panel that is covering the R2 button away from the throttle.

Pull the panel that is covering the R2 button away from the throttle.

Step 5

• Carefully push the R2 button from the outside of the panel.
• Be cautious of the spring attached to the button as it can be easily lost.

Carefully push the R2 button from the outside of the panel.

Be cautious of the spring attached to the button as it can be easily lost.

Step 6

• Remove the two 4 mm J1 JIS head screws from the panel covering the L2 button.

Remove the two 4 mm J1 JIS head screws from the panel covering the L2 button.

Step 7

• Carefully push the L2 button from the outside of the panel.
• Be cautious of the spring attached to the button as it can be easily lost.

Carefully push the L2 button from the outside of the panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Crystal Nguyen                     

Member since: 09/11/2017

621 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       CSU Fullerton, Team S2-G1, Bruce Fall 2017                        

                                                  Member of CSU Fullerton, Team S2-G1, Bruce Fall 2017 



                    CSUF-BRUCE-F17S2G1                     


                                            3 Members                     


                                            10 Guides authored                     

louis_tiquet - Jan 27, 2021

Reply

Hello, m R2 button is broken. Do you know where i can print a new one ?