Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Monitor panel
- 3 steps
Flags
2
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLenovo ThinkVision M14 Portable Monitor
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing the display bezel
- Remove the display bezel. It is held on by 2-sided tape. Removal is easier if you apply gentle heat to soften the tape.
- The bezel is taped in on all sides. Start from the sides and work your way around. Take care not to deform or bend the bezel.
Remove the display bezel. It is held on by 2-sided tape. Removal is easier if you apply gentle heat to soften the tape.
The bezel is taped in on all sides. Start from the sides and work your way around. Take care not to deform or bend the bezel.
1024
Step 2
Removing the panel
- The panel is held in with three strips of 10mm wide ~0,5-0,8mm thick strechy adhesive tape between the back of the panel and the magnesium case. Removal is difficult. Heating the case from the back can help. If the panel is already broken it is ok to force it out with a pry tool.
- Pay attention not to damage the display cable located in the lower left corner of the panel.
- Wear safety goggles since the display panel is glass and will shatter if bent.
The panel is held in with three strips of 10mm wide ~0,5-0,8mm thick strechy adhesive tape between the back of the panel and the magnesium case. Removal is difficult. Heating the case from the back can help. If the panel is already broken it is ok to force it out with a pry tool.
Pay attention not to damage the display cable located in the lower left corner of the panel.
Wear safety goggles since the display panel is glass and will shatter if bent.
Step 3
Removing the display cable
- The display cable is very delicate. Pay attention when removing it.
- Peel off the metal tape and pull the cable out towards the lower side of the panel. Do not lift upwards on the cable.
The display cable is very delicate. Pay attention when removing it.
Peel off the metal tape and pull the cable out towards the lower side of the panel. Do not lift upwards on the cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Mihail Tchetchelnitski
Member since: 05/30/2021
124 Reputation
1 Guide authored
Badges:
4
+1 more badge