Difficulty
Moderate
Steps
7
Time Required
4 - 5 minutes
Sections
2
- Bottom Cover
- 3 steps
- SSD
- 4 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackLenovo ThinkPad Yoga 12
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screws
- Remove the ten Phillips screws using a Philips 00 screwdriver
Remove the ten Phillips screws using a Philips 00 screwdriver
1024
Step 2
Prying
- Pry up the case carefully using a spudger.
- Make sure to not push the spudger in too far, as this could result in internal damage
Pry up the case carefully using a spudger.
Make sure to not push the spudger in too far, as this could result in internal damage
Step 3
Lift off cover
- Lift off the cover, and you’re done!
Lift off the cover, and you’re done!
Step 4
Remove SSD from the laptop
- Carefully remove two Phillips screws with a Phillips 0 screwdriver
- Static sensitive components!
Carefully remove two Phillips screws with a Phillips 0 screwdriver
Static sensitive components!
Step 5
- Gently grab the plastic tab. Lift and pull the SSD assembly out of the computer
Gently grab the plastic tab. Lift and pull the SSD assembly out of the computer
Step 6
Remove enclosure
- Remove the 4 identical Phillips screws with a Phillips 00 screw driver (they are on both sides).
Remove the 4 identical Phillips screws with a Phillips 00 screw driver (they are on both sides).
Step 7
Done!
- Carefully remove the SSD enclosure.
- Note: The SSD enclosure is made of thin metal. It can be easily deformed. Be careful when removing from the SSD.
Carefully remove the SSD enclosure.
Note: The SSD enclosure is made of thin metal. It can be easily deformed. Be careful when removing from the SSD.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
[deleted]
Member since: 03/18/2018
1,267 Reputation
3 Guides authored
Badges:
19
+16 more badges
Dani Deitch - Dec 13, 2020
Reply
Almost perfect instructions. I do recommend removing the active pen first. Also it’s a good idea to remind people that the active pen holder is screwed to the case cover from the inside and will come out as part of the cover.