Difficulty
Moderate
Steps
4
Time Required
10 - 25 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackThe Sharper Image Literati
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Wedge plastic spudger tool between the back panel and the body of device.
- Pry apart the back panel and the device.
Wedge plastic spudger tool between the back panel and the body of device.
Pry apart the back panel and the device.
1024
Step 2
- Desolder the battery wires from the circuit board.
Desolder the battery wires from the circuit board.
Step 3
- Warm the battery with a hair dryer.
- Be carful not to over-heat the battery, this could cause the battery to ignite.
Warm the battery with a hair dryer.
Be carful not to over-heat the battery, this could cause the battery to ignite.
Step 4
- Gently wedge a spudger or thin plastic card between the battery and the body of device. Work the spudger or card along the length of the battery to free it from the adhesive.
- Do not bend or puncture the battery. Work slowly and carefully.
Gently wedge a spudger or thin plastic card between the battery and the body of device. Work the spudger or card along the length of the battery to free it from the adhesive.
Do not bend or puncture the battery. Work slowly and carefully.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Spencer Dodder
Member since: 03/21/2018
560 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
IUPUI, Team S5-G4, Baechle Spring 2018
Member of IUPUI, Team S5-G4, Baechle Spring 2018
IUPUI-BAECHLE-S18S5G4
3 Members
8 Guides authored