Difficulty
Easy
Steps
4
Time Required
30 seconds - 1 minute
Sections
1
- Batteries
- 4 steps
Flags
0
BackThe Claw
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Batteries
- Hold The Claw machine upright so that the controls are facing you.
Hold The Claw machine upright so that the controls are facing you.
1024
Step 2
- Turn the device upside down keeping the controls facing in your direction.
Turn the device upside down keeping the controls facing in your direction.
Step 3
- Locate the battery compartment door on the bottom cover of The Claw.
- Loosen the screw from the battery compartment door with your phillips head screwdriver.
Locate the battery compartment door on the bottom cover of The Claw.
Loosen the screw from the battery compartment door with your phillips head screwdriver.
Step 4
- Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.
- If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.
Open the door and insert the 3 D-cell batteries using the correct configuration that is labeled on the inside of the compartment.
If the batteries are not placed in the right configuration the device will not operate. make sure to identify positive and negative sides of the battery and follow the configuration on the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Alain Pierre
Member since: 03/22/2016
1,149 Reputation
9 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 4-8, Catania Spring 2016
Member of UMass Dartmouth, Team 4-8, Catania Spring 2016
UMASSD-CATANIA-S16S4G8
3 Members
9 Guides authored