The Beatles Rock Band Hofner Bass Fret Buttons Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          15 minutes            

Sections

1

• Fret Buttons
• 8 steps

Flags

0

• BackThe Beatles Rock Band Hofner Bass

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fret Buttons               

• Flip the guitar onto its backside, so that the strummer is facing the table and the battery compartment is facing you.
• Use a J1 Phillips head screwdriver to remove ten 5mm short screws.
• Use a J1 Phillips head screwdriver to remove four 5mm long screws.

Flip the guitar onto its backside, so that the strummer is facing the table and the battery compartment is facing you.

Use a J1 Phillips head screwdriver to remove ten 5mm short screws.

Use a J1 Phillips head screwdriver to remove four 5mm long screws.

1024

Step 2

• Flip the guitar to the front, with the strummer and fret buttons facing you.
• Use a J1 Phillips head screwdriver to remove two 10mm silver, short screws.

Flip the guitar to the front, with the strummer and fret buttons facing you.

Use a J1 Phillips head screwdriver to remove two 10mm silver, short screws.

Step 3

• Flip the guitar on its back again, so that the strummer is facing down and the battery compartment is facing you.
• Pull off the back whole panel so that the guitar is now open.

Flip the guitar on its back again, so that the strummer is facing down and the battery compartment is facing you.

Pull off the back whole panel so that the guitar is now open.

Step 4

• Using a J1 Phillips screwdriver, unscrew the 10mm screw at the base of the neck.

Using a J1 Phillips screwdriver, unscrew the 10mm screw at the base of the neck.

Step 5

• Remove the head of the guitar, at the top of the neck. Do this by simply pulling on it, it should slide off out fairly easily.

Remove the head of the guitar, at the top of the neck. Do this by simply pulling on it, it should slide off out fairly easily.

Step 6

• Use a J1 Phillips screwdriver to remove three silver 10mm screws at the top of the neck.

Use a J1 Phillips screwdriver to remove three silver 10mm screws at the top of the neck.

Step 7

• Pop off the red button at the top by prying.
• Use a J1 Phillips screwdriver to remove the 10mm screw underneath.

Pop off the red button at the top by prying.

Use a J1 Phillips screwdriver to remove the 10mm screw underneath.

Step 8

• Remove the 10mm screw on the fret buttons with a J1 Phillips screwdriver.
• Remove the fret buttons.

Remove the 10mm screw on the fret buttons with a J1 Phillips screwdriver.

Remove the fret buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jacob                     

Member since: 01/25/2017

601 Reputation

                                      6 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 8-4, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 8-4, Banghart Winter 2017 



                    CPSU-BANGHART-W17S8G4                     


                                            3 Members                     


                                            6 Guides authored