Texas Instruments Ti 80 Motherboard And Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Batteries
2 steps
Back Casing
1 step
Motherboard and Screen
1 step

Flags

BackTexas Instruments TI-80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Batteries

Locate battery cover on the back of the case.
Slide battery cover to the right reveal the batteries.

Locate battery cover on the back of the case.

Slide battery cover to the right reveal the batteries.

1024

Step 2

Remove battery cover.
Slide the red lock down.
Slide the metal tab to the right of the top battery.
Remove the 3-Volt Lithium Coin Cell Battery.
Slide the red lock up.
Slide the metal tab to the right of the bottom battery.
Remove the 3-Volt Lithium Coin Cell Battery.

Remove battery cover.

Slide the red lock down.

Slide the metal tab to the right of the top battery.

Remove the 3-Volt Lithium Coin Cell Battery.

Slide the red lock up.

Slide the metal tab to the right of the bottom battery.

Step 3

              Back Case

Using a Torx, T-6 star-bit screwdriver, unscrew four 7.38 mm screws from battery housing.
Unscrew four 7.15 mm screws from back casing.
Using the blue plastic opener tool along the seam of the case, pry off front casing.
Start prying from the bottom of the calculator as the casing hooks into the top.

Using a Torx, T-6 star-bit screwdriver, unscrew four 7.38 mm screws from battery housing.

Unscrew four 7.15 mm screws from back casing.

Using the blue plastic opener tool along the seam of the case, pry off front casing.

Start prying from the bottom of the calculator as the casing hooks into the top.

Step 4

              Motherboard and Screen

Using a Philips PH0 screwdriver, remove the 6 screws. 2 from the top of the Motherboard, 2 from the middle, and 2 from the bottom of the Motherboard.
Using a Phillips Ph0 screwdriver, remove 4 screws from the screen mount.
Using the blue plastic opening tool, pry the Motherboard up.
Using the blue plastic opening tool, pry up the screen from the screen mount.

Using a Philips PH0 screwdriver, remove the 6 screws. 2 from the top of the Motherboard, 2 from the middle, and 2 from the bottom of the Motherboard.

Using a Phillips Ph0 screwdriver, remove 4 screws from the screen mount.

Using the blue plastic opening tool, pry the Motherboard up.

Using the blue plastic opening tool, pry up the screen from the screen mount.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    brian decater

Member since: 01/13/2015

301 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team 1-1, Carnegie Winter 2015                        

                                                  Member of Eastern Washington University, Team 1-1, Carnegie Winter 2015 



                    EWU-CARNEGIE-W15S1G1                     


                                            4 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team