Difficulty
Moderate
Steps
3
Time Required
30 minutes
Sections
2
- Opening the Tesco hudl2 case
- 2 steps
- Battery
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackTesco hudl2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Video Overview
Step 1
Open the case
- Take your time!
- Use a guitar pick, although some have successfully used a fingernail. Don’t use a screwdriver as you will damage the case.
- Start at one corner and carefully insert your tool, working it along the seam until you hear a click and the case starts to come apart.
- Carry on working your way around the case. Be very careful near the buttons.
- Eventually the rear case will come away. There aren’t any wires attached to the rear case, it just lifts off.
- When it’s time to reassemble, clip the rear cover back on carefully, making sure to fit the side with the buttons first and being careful to ensure they are positioned correctly.
Take your time!
Use a guitar pick, although some have successfully used a fingernail. Don’t use a screwdriver as you will damage the case.
Start at one corner and carefully insert your tool, working it along the seam until you hear a click and the case starts to come apart.
Carry on working your way around the case. Be very careful near the buttons.
Eventually the rear case will come away. There aren’t any wires attached to the rear case, it just lifts off.
When it’s time to reassemble, clip the rear cover back on carefully, making sure to fit the side with the buttons first and being careful to ensure they are positioned correctly.
1024
Step 2
- This is what you will see once the rear case is removed.
This is what you will see once the rear case is removed.
Step 3
Battery
- Unplug the old battery by gently rocking the white plug back and forth.
- Unscrew the four screws holding the battery down.
- Lift the battery out.
- Put in the new battery, reinsert the plug and replace the four screws.
- Test your tablet and make sure it’s working normally and will take charge.
Unplug the old battery by gently rocking the white plug back and forth.
Unscrew the four screws holding the battery down.
Lift the battery out.
Put in the new battery, reinsert the plug and replace the four screws.
Test your tablet and make sure it’s working normally and will take charge.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Tim
Member since: 08/31/2010
1,378 Reputation
10 Guides authored
Badges:
21
+18 more badges