Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 2 steps
  • Speakers
  • 4 steps

Flags

0

  • BackTengda S5+

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Place the phone screen-side down.

Place the phone screen-side down.

1024

Step 2

  • Using your fingernail or any prying tool (we used the Metal Spudger), begin to pry away the back panel starting at the bottom of the phone.
  • Continue to work your way around the phone counterclockwise until you can pull the back cover off.

Using your fingernail or any prying tool (we used the Metal Spudger), begin to pry away the back panel starting at the bottom of the phone.

Continue to work your way around the phone counterclockwise until you can pull the back cover off.

Step 3

              Speakers
  • Using either your thumb or an iFixit opening tool, remove the battery and set it aside.

Using either your thumb or an iFixit opening tool, remove the battery and set it aside.

Step 4

  • Unscrew the twelve 3 mm screws from the back panel using a Phillips #00 screwdriver.

Unscrew the twelve 3 mm screws from the back panel using a Phillips #00 screwdriver.

Step 5

  • Using the plastic opening tool, create space between the front screen and the metal casing.
  • Once the screen is separated from the back panel, pull the two pieces apart.

Using the plastic opening tool, create space between the front screen and the metal casing.

Once the screen is separated from the back panel, pull the two pieces apart.

Step 6

  • Using an iFixit opening tool, remove the speakers.
  • Do not be afraid to use a little force. The speakers are glued onto the phone, not wired.

Using an iFixit opening tool, remove the speakers.

Do not be afraid to use a little force. The speakers are glued onto the phone, not wired.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Andrew Lam

Member since: 04/23/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team 14-9, Amido Spring 2015                        

                                                  Member of Cal Poly, Team 14-9, Amido Spring 2015 



                    CPSU-AMIDO-S15S14G9                     


                                            4 Members                     


                                            10 Guides authored