Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Logic Board
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackTelstra Dave 4G ZTE T83
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Digitiser Cable
- Disconnect the digitizer cable from is socket, flip the brown clasp up from indicated edge and gently remove the cable.
Disconnect the digitizer cable from is socket, flip the brown clasp up from indicated edge and gently remove the cable.
1024
Step 2
Logic Board
- Be careful of LCD connector on the underside of the board through all of these steps (see green).
- Separate the logic board from front display. Apply heat to the front glass to loosen the adhesive, using a prying tool to separate the board. Be careful and move slowly, it is very strong.
- Be careful to remove the display first from the right side as there are clips along the left side.
- Ensure not to damage the LCD cable, remove once accessible by releasing the brown clasp from indicated side.
Be careful of LCD connector on the underside of the board through all of these steps (see green).
Separate the logic board from front display. Apply heat to the front glass to loosen the adhesive, using a prying tool to separate the board. Be careful and move slowly, it is very strong.
Be careful to remove the display first from the right side as there are clips along the left side.
Ensure not to damage the LCD cable, remove once accessible by releasing the brown clasp from indicated side.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Ryan
Member since: 08/19/2015
1,414 Reputation
14 Guides authored
Badges:
18
+15 more badges