Difficulty

Moderate

Steps

3

Time Required

                          5 minutes            

Sections

1

  • Side Panels
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackTefal Thick N Thin Toaster 815032

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Side Panels               
  • Turn the toaster upside down.
  • Remove the four 10 mm screws from the bottom of the toaster using a TR9 Torx screwdriver.
  • Remove the 14 mm Torx-slot combination screw on the opposite side of the toaster’s lever with a TR9 Torx screwdriver.
  • Remove the 11 mm Torx-slot combination screw near the toaster’s lever with a TR9 Torx screwdriver.

Turn the toaster upside down.

Remove the four 10 mm screws from the bottom of the toaster using a TR9 Torx screwdriver.

Remove the 14 mm Torx-slot combination screw on the opposite side of the toaster’s lever with a TR9 Torx screwdriver.

Remove the 11 mm Torx-slot combination screw near the toaster’s lever with a TR9 Torx screwdriver.

1024

Step 2

  • Remove the side of the toaster that does not have the lever.
  • The side will just pop off, as you have removed the screw holding it in place.

Remove the side of the toaster that does not have the lever.

The side will just pop off, as you have removed the screw holding it in place.

Step 3

  • Remove the 10 mm screw from the top of the remaining side of the toaster using a TR9 Torx screwdriver.
  • This side will pop off as well once you have removed the screw.
  • The toaster’s lever and heating slide will fall off with a simple pull.

Remove the 10 mm screw from the top of the remaining side of the toaster using a TR9 Torx screwdriver.

This side will pop off as well once you have removed the screw.

The toaster’s lever and heating slide will fall off with a simple pull.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Kristen Gismondi                     

Member since: 11/12/2014

69,397 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored