Tdk Life On Record Trek Max A34 Battery Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Battery
• 5 steps

Flags

0

• BackTDK Life on Record Trek Max A34

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip your device upside down so the battery cover is facing upwards.
• Using the Torx T6 screwdriver, remove all seven 6 mm Torx screws that are located along the perimeter of the battery cover.

Flip your device upside down so the battery cover is facing upwards.

Using the Torx T6 screwdriver, remove all seven 6 mm Torx screws that are located along the perimeter of the battery cover.

1024

Step 2

• Use the metal spudger prying tool to gently pry off the battery cover.
• The battery should now be exposed.

Use the metal spudger prying tool to gently pry off the battery cover.

The battery should now be exposed.

Step 3

• Starting from where the wires are connected, gently pull the battery out of the device.

Starting from where the wires are connected, gently pull the battery out of the device.

Step 4

• Unplug the battery from the device by detaching the wires at the white connection box.
• Detaching the wires may require some force.
• Be careful not to rip the wires out of the device or the battery.

Unplug the battery from the device by detaching the wires at the white connection box.

Detaching the wires may require some force.

Be careful not to rip the wires out of the device or the battery.

Step 5

• The battery is now separated from the device and may be replaced with a new battery.

The battery is now separated from the device and may be replaced with a new battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Kayla                     

Member since: 09/28/2015

315 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Texas Tech, Team 19-3, Rauch Fall 2015                        

                                                  Member of Texas Tech, Team 19-3, Rauch Fall 2015 



                    TTU-RAUCH-F15S19G3                     


                                            4 Members                     


                                            1 Guide authored                     

John Johnston - Feb 24, 2017

Reply

This post is incorrect on the size of the Torx driver! I literally just got done replacing an A34 battery and the T-7 is too large! A T-6 driver is required!

Wilfredo Natividad - Jun 4, 2020

Reply

my problem of my trek max unit

everytime recharge my trek max is hot.