Tatung Tac 6G Power Cord Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          30 minutes

Sections

Power Cord
9 steps

Flags

BackTatung TAC-6G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Power Cord

Lift the lid and bowl from the top of the device.
Be sure device is not plugged in before beginning replacement of power cord.

Lift the lid and bowl from the top of the device.

Be sure device is not plugged in before beginning replacement of power cord.

1024

Step 2

Turn device upside-down so that the three legs point upwards.

Turn device upside-down so that the three legs point upwards.

Step 3

Remove the one 7mm Phillips Head #3 spanner screw from the side of the brass panel.

Remove the one 7mm Phillips Head #3 spanner screw from the side of the brass panel.

Step 4

Lift the brass plate from the device and set it aside.

Lift the brass plate from the device and set it aside.

Step 5

Remove the 7mm Phillips #3 brass screw that connects the white power cord wire and blue wire closest to the power cord.

Remove the 7mm Phillips #3 brass screw that connects the white power cord wire and blue wire closest to the power cord.

Step 6

Remove the 10mm Phillips #3 brass screw above the heating element that connects the white power cord wire and the maroon wire.

Remove the 10mm Phillips #3 brass screw above the heating element that connects the white power cord wire and the maroon wire.

Step 7

Using your hands, from the inside of the device, push the black plastic wire holder to release cords.

Using your hands, from the inside of the device, push the black plastic wire holder to release cords.

Step 8

Pull the power cord through the hole, isolating the power cord from the device.

Pull the power cord through the hole, isolating the power cord from the device.

Step 9

Thread the new power cord wires into the hole.
To ensure the power cord is compatible with the device, make sure that the replacement cord you are using has a proper insulating coating and uses a NEMA 1 plug. NEMA 1 plugs are the common type of plug that have two parallel “|” shaped metal beams.

Thread the new power cord wires into the hole.

To ensure the power cord is compatible with the device, make sure that the replacement cord you are using has a proper insulating coating and uses a NEMA 1 plug. NEMA 1 plugs are the common type of plug that have two parallel “|” shaped metal beams.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    Katy Weber

Member since: 01/28/2016

134 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       University of Alabama, Team 1-6, Sydow campbell Spring 2016                        

                                                  Member of University of Alabama, Team 1-6, Sydow campbell Spring 2016 



                    UA-SYDOW CAMPBELL-S16S1G6                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team